Where to find tools
All tools required to fix your Cowboy are either shipped with your bike in the accessory box, or commonly found in any local bike or hardware store.
Allen Keys (3mm, 4mm, 5mm, 6mm) -> Shipped with your Cowboy, or any hardware or bike shop, or online (example here)
Allen Keys (8mm) - Any hardware store or bike shop, or online (example here)
Tyre Lever - Any local bike shop, or online (examples here)
Pin Spanner -> Shipped with your Cowboy, or easily available via most hardware shops or online (example here)
Wrench (17mm, 18mm) -> Any hardware store, or online (example here)
Torx 25 - Any hardware store or online (example here)
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST Tutorials
How to | Tutorial | Tools Needed |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Install the Kickstand | 8 mm Allen key | |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Install the Rear Rack | 3mm Allen key, 5mm Allen key | |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Install the Trailer Adaptor | 8mm Allen key, 17mm wrench | |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Remove/Install the Rear Wheel | 8mm Allen key | |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Fix a Puncture, Rear Wheel | 8mm Allen key, tyre lever, pump | |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Fix a Puncture, Front Wheel | 8mm Allen key, tyre lever, pump | |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Remove or Replace the Belt | Link** | 5mm Allen key |
Cowboy Classic / Cowboy Cruiser / Cowboy Cruiser ST - Adjust or Tighten the Belt | 5mm Allen key, pin spanner |
** please note, the tutorial title is about removing the rear rack, the content includes the belt removal.
Cowboy 3 and Cowboy 2 Tutorials
How to | Tutorial | Tools Needed |
C2/C3 - Remove/Install the Rear Wheel | 18mm wrench, 5mm Allen Key, pin spanner | |
C2/C3 - Fix a Puncture, Rear Wheel | 18mm wrench, tyre lever, pump | |
C2/C3 - Fix a Puncture, Front Wheel | 5/6mm Allen key, tyre lever, pump | |
C2/C3 - Remove or Replace the Belt | 5mm Allen key, pin spanner, Torx 25 | |
C2/C3 - Adjust or Tighten the Belt | 5mm Allen key, pin spanner | |
C2/C3 - Align the brake pads | 4mm Allen key | |
C2/C3 - Replace the brake pads | 3mm Allen key, (optional clean cloth and wd40 PFTE dry lube spray) | |
C2/C3 - Replace the brake discs | 18mm wrench, Torx 25, 5 or 6mm Allen key (depending on model of thru axle) | |
C2/C3 - Clean the brake discs | 3mm Allen key, 18mm wrench (rear wheel), 6mm Allen key (front wheel), a clean cloth, disc cleaner |
Cowboy 1 Tutorials
How to | Tutorial | Tools Needed |
C1 - Remove/Install the Rear Wheel | 18mm wrench, plyers, a zip tie | |
C1 - Fix a Puncture, Rear Wheel | 18mm wrench, tyre lever, pump, plyers, a zip tie | |
C1 - Fix a Puncture, Front Wheel | 5mm Allen key, tyre lever, pump | |
C1 - Remove or Replace the Belt | 3mm Allen key, heat gun | |
C1 - Adjust or Tighten the Belt | 5mm Allen key, 4mm Allen key, belt tensioning tool/gates app | |
C1 - Replace the brake pads | 3mm allen key, (18mm wrench and 5mm allen key if removing the wheels) |