Skip to main content
Belt - Broken/Damaged Belt (C1, C2, C3)

How to solve the issue: Belt - Broken/Damaged Belt (C1, C2, C3)

Laura from Cowboy avatar
Written by Laura from Cowboy
Updated over a week ago

How do i know i have this issue?

Your belt is broken or snapped (if it has fallen off instead, you will have a separate issue with an easy solution)

What causes this issue?

Belts have an expected lifetime and will always break after a certain usage.

Is this issue covered by warranty?

Where to have this issue fixed?

This issue is not specific to Cowboy bikes, so once you have received your parts, it's quickest to visit your local bike shop who will be able to fix this in a few minutes.

  • Local Bike shop: We recommend visiting your local favourite bike shop to easily and quickly fix this issue. Just ask them to check your brake calipers, pads and discs and show them the instructions below.

  • Cowboy Certified Bike Shop: If you are near a Cowboy Certified Bike Shop, you can also drop in there. Check our map here

  • Self repair: If you are handy, you can check the videos below and try it out yourself.

Spare Parts Required

  • You can buy the part here. Under Spare Parts > "Source Cowboy specified extras". Choose the belt that corresponds to your bike model.

Tools Required

  • 5mm Allen Key

  • Belt Tension Tool

  • Torx 25

  • Pin Spanner (available in your Cowboy accessory kit, or here, or any good bike tool shop)

Repair Instructions

(You can share these instructions with your local bike shop)

Did this answer your question?